Drain Cleaning in San Diego

Drain cabling

Cabling sends a cutting head down the line and opens the obstruction where it sits. It restores flow, but it does not change the inside surface of the pipe. For a one-off blockage, that is often the whole job.

Hydro jetting

Jetting scours the full circumference of the pipe wall along the run, so what comes away is the layer that had been narrowing the line rather than only the plug that finally closed it.

Drain descaling

Descaling aims at hard buildup on the pipe wall itself, the kind that keeps narrowing a line that was cleared before.

Signs a drain needs more than a plunger

• Several fixtures draining slowly at once, rather than one sink.
• Gurgling from a drain or toilet when another fixture is running.
• Water backing up into a tub or shower when a toilet is flushed or the washer drains.
• A drain that clears and then closes again in the same place.
• Sewage odor around floor drains or fixtures.

One slow fixture usually points at that fixture's own branch. Several at once usually points further down the line, past the point where those branches join.

When the drain keeps coming back

The interval is the tell. A line that closes again soon after it was cleared is usually describing its own diameter rather than a one-off obstruction, which is why a repeat blockage is usually a jetting or descaling conversation rather than another cabling.

If the line is failing rather than blocked, cleaning is no longer the answer. The trenchless routes work inside the existing path: a liner is formed against the inside of the old pipe, and pipe bursting pulls a new pipe through the line the old one occupied. Pipe liners and underground pipe bursting are both on our plumbing list. Access, what the pipe is made of and how much of the run is affected decide between them, and none of that is answerable from a photograph.

What to expect

• Call or send the form. Say which drains are slow, whether it is one fixture or several, and whether it has happened before.
• Site visit. Plumbing usually starts with a site visit, and which of the three methods a line is asking for is a site-visit question.
• The work. Cabling, jetting or descaling, or a lining or bursting conversation if the line itself is failing.